Produced By

ECI Logo

See our other restoration products that can help you on your current or upcoming projects!

ROSENDALE-LOGO3
facebook1
email1

SDS Section

Rosendale Natural Cement® is made from 100% argillaceous limestone. It’s safety and handling characteristics are similar to other cement products, and accordingly, normal precautions should be taken in the course of storage, transportation and use. Natural cement rock is somewhat variable in composition, and may contain trace amounts of mineral impurities. Please refer to the Safety Data Sheet for complete safety and handling guidelines.

Rosendale Product Safety Data Sheets

Rosendale 10C Cement

Rosendale 11G & 11Gi Grout

Rosendale 12M Mortar

Rosendale 13P Patching Compound

Rosendale 14S Stucco

Rosendale 15W Whitewash

Rosendale 16B Beton Concrete

[Home] [History] [Performance] [Chemistry] [Specifications] [Products] [Support] [Safety] [Historic Mortars] [Conferences]

3 Northwest Drive

Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280

E-Mail: Contact Us

Rosendale Natural Cement Products®
is a registered trademark of Edison Coatings, Inc.

Rosendale Natural Cement Products® are manufactured in the United States of America from 100% American Natural Cement. This is authentic historic material, extracted from historic sources, as originally used in construction of thousands of American and Canadian buildings and structures in the 19th and 20th Centuries. Rosendale 10C Natural Cement and Quick Setting Natural Cement conform to the requirements of ASTM C10/10M-14.

Translantic Natural Cements(TM) are manufactured in the United States of America from USA and globally-sourced components. Translantic Natural Cement conforms to the requirements for Quick-Setting Natural Cement in ASTM C10/10M-14.

Accept No Substitutes!

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. Product data and formulations are subject to change without prior notice. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE.

Copyright 2014-18, Edison Coatings, Inc., All Rights Reserved