Produced By

ECI Logo

See our other restoration products that can help you on your current or upcoming projects!

ROSENDALE-LOGO3
facebook1
email1

Support

On-Site Training and Consultation Services are an integral part of our product stewardship. Support services for Rosendale Natural Cement Products® are offered through a network of independent experts, field representatives and Edison Coatings technical staff.

We are committed to the success of every Rosendale Natural Cement Products® project, and can arrange the level of support that is most appropriate for each situation.

Photo: The New York State Armory in Poughkeepsie, NY was restored with Rosendale 12M natural cement mortar, custom matched to the original natural cement mortar. Brownstone repairs were performed using Custom System 45 Type SD. On-site training services brought the entire crew up to speed, for both natural cement repointing and sandstone repair.

[Home] [History] [Performance] [Chemistry] [Specifications] [Products] [Support] [Safety] [Historic Mortars] [Conferences]

3 Northwest Drive

Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280

E-Mail: Contact Us

Rosendale Natural Cement Products®
is a registered trademark of Edison Coatings, Inc.

Rosendale Natural Cement Products® are manufactured in the United States of America from 100% American Natural Cement. This is authentic historic material, extracted from historic sources, as originally used in construction of thousands of American and Canadian buildings and structures in the 19th and 20th Centuries. Rosendale 10C Natural Cement and Quick Setting Natural Cement conform to the requirements of ASTM C10/10M-14.

Translantic Natural Cements(TM) are manufactured in the United States of America from USA and globally-sourced components. Translantic Natural Cement conforms to the requirements for Quick-Setting Natural Cement in ASTM C10/10M-14.

Accept No Substitutes!

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. Product data and formulations are subject to change without prior notice. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE.

Copyright 2014-18, Edison Coatings, Inc., All Rights Reserved